The new SAFE-GUARD-3 for regulator mounting, available from July 2014, contains a host of new upgrades to performance, filtration, Instructions, and product marking. Complies fully with ISO 5175-1. FUNCTIONS FA Sintered flame arresting element NV Non return valve to prevent reverse flow of gases TV Thermal trip device, activated by heat to permanently cut off the gas supply Art. Nr. Gas Working pressure Inletconnecti
The latest innovation from GCE the SAFE-GUARD-5 offers the maximum level of protection required by ISO 5175-1 to prevent dangerous flashbacks from reaching the regulator and cylinder supply sources. FEATURES There are so many conditions that can cause a flashback, the fitting a flashback arrestor is commonsense. This unit offers the highest level of safety. Maximum number of safety features defined by ISO 5175-1 High v
Earth clamps designed for semi-professional use, for general use with small welding machines. Cable fixing directly at the point of contact. Insulated handle.STANDARD: BS-638.5 Art. Nr. Description Qt. 10000022 Earth clamp Eco-mas plus 200 1 10000023 Earth clamp Eco-mas plus 400 1 TECHNICAL DATA Eco-mas Plus200 Eco-mas Plus400 A35% 200A 400A A60% 150A 300A
For brazing ferrous metals and copper alloys. Brazing of alloys, steels, bronzes and galvanized metals. Pipe making, vehicle bodywork, maintenance, ironmongery, farming implements. IDEAL FOR:Brass alloys. High quality, resistant and malleable braze welds. Excellent fluidity with no zinc evaporation on galvanized steel. ISO 17672: Cu471 AWS A5-8: RB CuZn-A TECHNICAL DATA Chemical composition (%): Cu:59 Zn:39,8 Si:0,2 Others-
Filler metal for autogenous welding or TIG welding of aluminium alloys. Welding of aluminium castings with Si > 7 %. High tensile strength and corrosion-proof. Low melting temperature. IDEAL FOR:Aluminum welding oxy-acetylene or TIG. Smooth melting without bubbling and slag. ISO 18273: S Al 4047 (AlSi12) AWS A5.10: ER 4047 TECHNICAL DATA Chemical composition (%): Al:(base) Si:12,0 Fe:<0,5 Cu:0,007 Mn:0,05 Mg:0,02
Filler alloy for TIG welding of stainless steels (304L, 304, 347, 321, etc). IDEAL FOR:Welding of piping systems, works of fine thickness equal or lower than 3 mm and for penetration passes.Suitable also for oxy-acetylene welding (not oxy-propane). ISO 14343: W 19 9 L Si AWS A5.9: ER308L Si WERKSTOFFNUMMER: 1,4316 TECHNICAL DATA Chemical composition (%): Fe:(base) C:0,02 Cr:20 Ni:10 Si:0,80 Mn:1,75 Mechanical proper
Filler alloy for TIG welding of stabilised stainless steels (316, 316L, etc) or not stabilised. Service temperature from -120°C up to +400°C. Applied in the chemical and petrochemical industries, refineries, food industries. IDEAL FOR:Welding of piping systems, works of fine thickness equal or lower than 3 mm and for penetration passes.Suitable also for oxy-acetylene welding (not oxy-propane). ISO 14343-A: W 19 12 3 L Si AWS A5.9: ER
Filler alloy for autogenous welding of mild steels. Autogenous welding of all pieces in soft steel. Piping, vehicle bodywork and maintenance. Also suitable for use by plumbers and boiler repairers. IDEAL FOR:Joining extra soft steels by oxy-acetylene welding (not oxy-propane). Soft melting without bubbling or slag. Copper-plated steel doesn‘t rust, no mess, no bubbling during welding. Standards: ISO 16120-2: C10D TECHNICAL DATA
For brazing ferrous metals and copper alloys. Brazing of alloys, steels, bronzes, galvanized metals. Pipe making, vehicle bodywork, maintenance, ironmongery, farming implements. IDEAL FOR:Brass alloys. High quality resistant and malleable braze welds. Excellent fluidity with no evaporation of zinc on galvanized steels. ISO 17672: Cu471 AWS A5-8: RB CuZn-A TECHNICAL DATA Chemical composition (%): Cu:59 Zn:39,8 Si:0,2 Others-
Phosphor-copper alloy for brazing copper alloys. Assembly of copper pipes and tubing through capillary action. Heating, sanitary fittings, refrigeration industry. CAPILLARY-ACTION BRAZING: It flows very smoothly. Low melting point copper and phosphorus alloy for brazing copper without using pickling products. Reserved exclusively for brazing copper and copper alloys. To be used with an oxyacetylene or oxy-propane welding torch with n