Alloy with high silver content (30%) for joining steel/brass/copper pieces. Wide joints in piping, plumbing, climate control and exchangers. Brazing generally at low temperatures. CAPILLARY-ACTION BRAZING: Copper-silver-zinc alloy with low melting point for brazing copper and copper alloys, steels and stainless steels. Available in bare or flux coated rods. Extremely flexible coating (it does not crumble when bending the rod). GAZARGENT 30 is
To meet safety requirements, the gas supply to operating rooms etc must be fitted with a device to allow instant shut off. To allow maintenance the gas supply must be controlled by section. To achieve the demands of safety and maintenance, shut-off valves should be fitted in every main line, riser and branch line in the pipework system.The valves are degreased and blown clean. They can be equipped with unions to be soldered to the copper piping.B
Alloy with high silver content (40%) for joining steel/brass/copper pieces. Alloy for universal use. Brazing, generally at low temperatures, of copper, copper alloys and all kinds of steel, including stainless. Water/gas pipes. Climate control systems. CAPILLARY-ACTION BRAZING: Copper-silver-zinc alloy with low melting point for brazing copper and copper alloys, steels and stainless steels. Available in bare or flux coated rods. Extremely flexi
Alloy with high silver content (34%) for joining steel/brass/copper pieces. Suitable for delicate assemblies with tight and middle clearances. Good joint filling capacity. Brazing generally at low temperatures. CAPILLARY-ACTION BRAZING: Copper-silver-zinc alloy with low melting point for brazing copper and copper alloys, steels and stainless steels. Available in bare or flux coated rods. Extremely flexible coating (it does not crumble when b
Alloy with high silver content (55%) for joining steel/brass/copper pieces. Especially suitable for medical gases, purified gases and in the food industry. Alloy for universal use. Brazing, generally at low temperatures, of copper, copper alloys and all kinds of steel, including stainless. Its excellent fluidity makes it suitable in closely fitting joints as it can penetrate very tight gaps. HVAC, automotive, food and sanitary, electric industry,
Whole medical range is available on gcehealthcare.com MediConnect is a new generation of flexible hoses for gas supply, intended for use with respiratory, anaesthetic and emergency equipment. Resistant to abrasion and change of colour Latex and phthalate free Containing antistatic inner layer Colour coding of ISO 5359 (obtionally neutral coding) Wide range of country specific connections Lengths of hoses from 0,5 to 5 m; to be specifie
Whole medical range is available on gcehealthcare.com Medical high pressure hoses are used to connect cylinders or cylinder bundles to gas supply systems. The high pressure hose is intended to be used with a pressure up to maximum 230 bar. Pressure tested at 345 bar. The hose is equipped with a safety wire. HANDLING The high pressure hose shall be transported, stored, installed and maintained according to Instruction of Use. Maximum life time
Whole medical range is available on gcehealthcare.com The Simplex MMR gas manifold is suitable for such health care where the capacity requirement is limited, such as laboratories and small health care clinics, veterinary etc. This gas manifold consists of only one group of cylinders. The regulator is mounted in the collection unit. Each inlet connection has a filter, a non-return valve and a shut-off valve. This arrangement makes it possilble
Whole medical range is available on gcehealthcare.com Mediflow® II 50 lpm is a flow selector intended for use for resuscitation and for CPAP. Innovative self centering flow setting device with continuous flow between settings. In the unlikely event of indent mechanism failure, the patient will still be supplied by medicinal gas Lateral and frontal reading of flow setting Enables to get up to 50 lpm for supplying machines (not for use
Based on the proven heat transfer design of the XHR-300, the XHR-301 allows greater outlet pressures to 150 barvia its piston sensed element. FEATURES ATEX certified to EEx d IIC T3 Dual, independent, 100 W heaters for pre heat and re-heat of sample gas 316SS Piston sensed element for low torque adjustment and high pressure control Large surface area for heat transfer Easy to wire circuit board with 115 V or 230 V supply Stylish Junction